Decorative Fixtures
Conveniently Clean Crystal Chandeliers And Lighting Fixtures
We always remember to vacuum the floor and dust the couch but do not often remember to clean the light fixtures. most of the times, dirty lamps are responsible for the dull appearance of a room. so, roll up your sleeves and attack your dirty crystal chandeliers and lighting fixtures today.
When you get down to cleaning your lighting fixtures, always use only the correct cleaning solution. It may be okay to use glass cleaner for some kind of lamps but for crystal use only specialized formulas. try to purchase only eco-friendly cleaners. also make sure it does not have toxic fumes. It may be dangerous to you and your dear ones.
Turn off the lamps and lighting fixtures to be cleaned. if they are hooked to the electrical outlet, unplug them and wait for a while. when the fittings are cool to the touch, you can proceed. Not adhering to this may damage the fittings or hurt you. sometimes, if the cleaning agent touches a hot metallic surface, it may produce undesirable chemicals.
Check if all the bulbs are tight and secure. if they are loosely fitted, remove them and screw them back on tightly. you do not want to knock off bulbs while cleaning. if you think it is not possible to test screw on all the bulbs again, as in case of a 50 bulb chandelier, it is still recommended you do this. Or get a professional to.
If there are not too many bulbs, cover each bulb with a plastic cover and tie it up at the base. this will stop moisture from corroding the electrical bases. this is crucial as you are going to be randomly spraying all over and the sockets have to be protected from the cleaning solution.
Cover the floor below the lamp to catch all the excess cleaning agent that will be dripping all over the floor. Spread some absorbent towels and probably top with some old newspapers. some preparation in the beginning will save you a lot of clean up after. you can just throw away the soggy newspapers and toss the towels in the washing machine as against scrubbing and mopping the floor.
Most of the new light fixture cleaning solutions come in a sprayer with or without a pump. they are very easy to apply. just hold the chandelier steady, hold the can straight, a couple of inches away and spray all over the fixture. make sure you cover every inch. go around the lamp. Do not stand in one place and rotate it towards you. It may unscrew or rock and get unstable. you may also inadvertently knock of some parts, breaking them.
Let it stand for half an hour and then wipe off the excess solution with a soft towel, gently polishing as you go. The lamp will be restored to its original sheen. if not, you can probably repeat the process. It may take at least two repeats if it is really really grimy. Repeat this process every month and watch the whole room glow because of your clean light fittings.
You can find some of the most beautiful crystal chandeliers and lighting fixtures at lightingtheweb.com.
